手錶

請將您的手錶委託給提供 Swarovski 手錶的授權 Swarovaki 零售店、製錶師或珠寶商，他們將為您更換電池。

可從大多數授權的 Swarovski零售店購買或訂購替換錶帶。

Swarovski 手錶的金屬組件是由不銹鋼製成，基本上不會生鏽、變色和腐蝕。

鎳也是其結構的組成部份。

用於 Swarovski 手錶的所有材料符合歐盟對鎳釋放的相關法規。

在某些極罕有的情況下，對鎳非常敏感的膚質可能會對 Swarovski 手錶出現過敏反應。如果您遇到這種情況，我們建議您停止配戴 Swarovski 手錶。

Swarovski 手錶鑲有品質上乘的 Swarovski 水晶。

Information on features and instructions on how to change watch settings can be found in the operating instructions manual.

Strap exchange can be done without any tools

1 - Gently pull spring clip and lift the strap out
2 - Place one end of the new strap into the slot
3 - Gently pull spring clip once again and insert the other end into the remaining slot
4 - Release the spring clip until it clicks. Check by carefully pulling the strap to make sure it is attached properly

Link to instructions

1. Remove product from the packaging.

2. To install the Swarovski sparkling case, position it carefully on top of the Apple Watch®.

3. Ensure that the Swarovski case matches the shape of the Apple Watch® in line with the position of the buttons.

4. To remove the Swarovski case, detach it carefully by lifting it up from the Apple Watch®.

5. To clean the Swarovski case, use a clean, dry and antistatic cloth to remove light dust layers. For heavier dirt, use lukewarm water with a little dishwashing detergent.

6. The Swarovski sparkling case is specifically designed for the Apple Watch® in size 40mm and 44mm and is compatible with Apple Watch® Series 4 and 5.

7. Avoid contact with water as the Swarovski sparkling case is a delicate product.

8. Apple Watch® is a trademark of Apple Inc.

9. Swarovski is not liable for defects or malfunction caused by misuse, abuse, failure to follow provided instructions, or use with equipment with which it is not intended to be used.

Opening your Swarovski timepiece is simple. Begin by locating the fold-over clasp and gently lifting the secure lock with your fingertip. On a new watch, the mechanism may feel slightly firm at first, but it will ease with time. Once unlatched, the bracelet effortlessly releases, allowing you to slip into and out of your timelessly elegant Swarovski watch with ease.

Bringing your Swarovski timepiece to life is effortless. Gently unbox your new watch, revealing its exquisite craftsmanship. Carefully remove any protective film from the watch face. To activate the precision movement, simply remove the plastic strip safeguarding the battery. Now, set your watch to the correct time by following the instructions below. Finally, open the clasp or unfasten the strap, and slip it onto your wrist for a perfect fit. 

Each Swarovski timepiece is meticulously crafted with traditional techniques. If you wish to add more links to your watch, we recommend entrusting this adjustment to an authorized Swarovski retailer, a skilled watchmaker, or a professional jeweler to ensure its precision and beauty remain uncompromised.

Swarovski watches are designed with exceptional craftsmanship, combining tradition with delicate precision. If your watch strap feels too loose and requires adjustment, we recommend entrusting it to an authorized Swarovski retailer, a skilled watchmaker, or a professional jeweler to preserve its elegance and accuracy. Or, if you simply want to change the strap style, the process is quick and easy, just check out our guide.

Setting the time on your Swarovski watch is effortless:

1. Gently pull out the crown from the side of your watch to its furthest position (position C in your manual).
2. Rotate the crown until the hour and minute hands align with your desired time.
3. Press the crown back into its original position, securing the setting.