Watches
Battery replacement
Please entrust your watch to an authorized Swarovski retailer that offers Swarovski watches, to a watchmaker, or to a jeweler who will replace the battery for you.
Strap replacement
Replacement straps are available to purchase and can be ordered from most authorized Swarovski retailers.
Metal parts on watches
The metal components of Swarovski watches are made of stainless steel, that is virtually immune to rust, discoloration, and corrosion.
Nickel is also a component part of this composition.
All materials used for Swarovski watches comply with European regulations on nickel release.
In some very rare cases, allergies to Swarovski watches may occur due to high skin sensitivity to nickel. If this happens to you, we recommend that you cease wearing Swarovski watches.
Swarovski watches are embellished with premium quality Swarovski crystals.
Nickel is also a component part of this composition.
All materials used for Swarovski watches comply with European regulations on nickel release.
In some very rare cases, allergies to Swarovski watches may occur due to high skin sensitivity to nickel. If this happens to you, we recommend that you cease wearing Swarovski watches.
Swarovski watches are embellished with premium quality Swarovski crystals.
Watch certificate & manual
Information on features and instructions on how to change watch settings can be found in the operating instructions manual.
Watch straps
Strap exchange can be done without any tools
1 - Gently pull spring clip and lift the strap out
2 - Place one end of the new strap into the slot
3 - Gently pull spring clip once again and insert the other end into the remaining slot
4 - Release the spring clip until it clicks. Check by carefully pulling the strap to make sure it is attached properly
Link to instructions
Sparkling case compatible with Apple Watch® care & maintenance
1. Remove product from the packaging.
2. To install the Swarovski sparkling case, position it carefully on top of the Apple Watch®.
3. Ensure that the Swarovski case matches the shape of the Apple Watch® in line with the position of the buttons.
4. To remove the Swarovski case, detach it carefully by lifting it up from the Apple Watch®.
5. To clean the Swarovski case, use a clean, dry and antistatic cloth to remove light dust layers. For heavier dirt, use lukewarm water with a little dishwashing detergent.
6. The Swarovski sparkling case is specifically designed for the Apple Watch® in size 40mm and 44mm and is compatible with Apple Watch® Series 4 and 5.
7. Avoid contact with water as the Swarovski sparkling case is a delicate product.
8. Apple Watch® is a trademark of Apple Inc.
9. Swarovski is not liable for defects or malfunction caused by misuse, abuse, failure to follow provided instructions, or use with equipment with which it is not intended to be used.
2. To install the Swarovski sparkling case, position it carefully on top of the Apple Watch®.
3. Ensure that the Swarovski case matches the shape of the Apple Watch® in line with the position of the buttons.
4. To remove the Swarovski case, detach it carefully by lifting it up from the Apple Watch®.
5. To clean the Swarovski case, use a clean, dry and antistatic cloth to remove light dust layers. For heavier dirt, use lukewarm water with a little dishwashing detergent.
6. The Swarovski sparkling case is specifically designed for the Apple Watch® in size 40mm and 44mm and is compatible with Apple Watch® Series 4 and 5.
7. Avoid contact with water as the Swarovski sparkling case is a delicate product.
8. Apple Watch® is a trademark of Apple Inc.
9. Swarovski is not liable for defects or malfunction caused by misuse, abuse, failure to follow provided instructions, or use with equipment with which it is not intended to be used.
How to open a Swarovski watch clasp
Opening your Swarovski timepiece is simple. Begin by locating the fold-over clasp and gently lifting the secure lock with your fingertip. On a new watch, the mechanism may feel slightly firm at first, but it will ease with time. Once unlatched, the bracelet effortlessly releases, allowing you to slip into and out of your timelessly elegant Swarovski watch with ease.
How to start a Swarovski watch
Uvedení vašich hodinek Swarovski do chodu je snadné. Jemně vyjměte nové hodinky z krabičky a obdivujte jejich dokonalé zpracování. Opatrně odstraňte ochrannou fólii z ciferníku. Pro aktivaci přesného strojku jednoduše odstraňte plastový proužek chránící baterii. Nyní nastavte na hodinkách správný čas podle níže uvedených pokynů. Nakonec otevřete sponu nebo rozepněte řemínek a nasaďte si hodinky na zápěstí pro perfektní padnutí.
Jak přidat články k hodinkám Swarovski
Každý časoměrný kousek od Swarovski je pečlivě vyroben tradičními technikami. Pokud si přejete přidat další články k vašim hodinkám, doporučujeme svěřit tuto úpravu autorizovanému prodejci Swarovski, zkušenému hodináři nebo profesionálnímu klenotníkovi, aby byla zajištěna jejich přesnost a krása.
Jak upravit hodinky Swarovski
Hodinky Swarovski jsou navrženy s výjimečným řemeslným zpracováním, které spojuje tradici s jemnou precizností. Pokud se vám řemínek hodinek zdá příliš volný a vyžaduje úpravu, doporučujeme svěřit jej autorizovanému prodejci Swarovski, zkušenému hodináři nebo profesionálnímu klenotníkovi, aby byla zachována jeho elegance a přesnost. Nebo pokud si chcete jednoduše změnit styl řemínku, je postup rychlý a snadný, stačí se podívat na nášprůvodce.
Jak nastavit hodinky Swarovski
Nastavení času na vašich hodinkách Swarovski je snadné:
- Jemně vytáhněte korunku na boku hodinek do krajní polohy (poloha C v návodu).
- Otáčejte korunkou, dokud se hodinová a minutová ručička nenastaví na požadovaný čas.
- Zatlačte korunku zpět do původní polohy a tím nastavení zajistěte.