Our Planet

In collaboration with the Science Based Targets initiative, we have set ambitious carbon emission-reduction targets, including reducing our Scope 1 and 2 emissions by 47% and our Scope 3 emissions by 28% by 2030. We began by defining the areas of our business where we can most readily shrink our carbon footprint, meaning that since 2019 we have already reduced Scope 1 and 2 emissions by 12% and Scope 3 emissions by 26%.​ Here’s how we are doing it:

Scope 1 and 2 reduction plans:​
•    Investing in our energy infrastructure, including renewables, photovoltaics, heat pumps, hydrogen infrastructure, and storage potential to further improve our energy efficiency.
•    Introducing electrification wherever possible, including for our glass-melting furnaces.
•    Outbalancing our remaining energy consumption with renewable Energy Attribute Certificates.

Scope 3 reduction plans:​
•    Increasing our product material efficiency and switching from primary to recycled metal sources.
•    Operating a global hybrid working policy (including some days working from home).
•    Working with our suppliers to encourage more renewable energy in their production processes.
•    Gradually shifting from air to sea and train freight.

Solar Power​

As part of our efforts to increase our energy efficiency, reduce our greenhouse gas emissions, and switch to renewable energy sources wherever possible, our aim is to expand the use of photovoltaics at our manufacturing sites and administrative offices. In Wattens, Austria, we have installed our second large-scale photovoltaic system, providing 300 Kilowatt peak (kWp) covering 1,600m2. We have previously installed a 1400kWp system at our crafting site in Thailand as well as a solar rooftop hot water system in India, and there are more photovoltaic installations in the pipeline.
​
Glass-melting furnace design study

Together with a multinational glass company specializing in glass and glass-ceramics, we commenced a design study to test if our aggregates could be melted solely using electric power. The study showed that the aggregates can be melted using 90% electricity, meaning we can substantially reduce the use of gas during this process. We are close to implementing a concept to address the remaining 10% of energy used. Once we have achieved this, we will be able to melt large volumes of aggregates using 100% renewable energy, marking a big milestone in our journey towards reducing the carbon footprint of our crystal.

With more than 7,500 direct and indirect points of sale around the world, our retail distribution is clearly key to our greenhouse gas emissions-reduction roadmap. We have recently launched a new store concept as part of our brand transformation, which consumes considerably less energy than the one it replaced. Additionally, our new GLEAM Standard (Guidelines for Engineering, Architecture & Management) outlines our strengthened internal architecture protocol, ensuring that our new openings and refurbishments will be more energy efficient, use more sustainable materials, and incorporate inclusive design and smart IoT management to analyse data. As a general practice, all our flagships will continue to undergo a full LEED certification (Leadership in Energy and Environmental Design).

While much attention is paid to the materials stores are constructed from, and how much energy they consume, there is less focus on the significant volumes of waste material produced by store relocations, closures, and refurbishments. We have run multiple pilots to investigate the potential for recycling former elements of our store architecture, and we have so far recycled more than 100 metric tons of material via our commercial partners. We firmly believe it is our responsibility to act sustainably at the end of a store’s life and not just ahead of its grand opening or during daily operations.

We have mandated that, by 2030, 50% of our products must be created in line with our Sustainable Products Guiding Principles:​

•    Materials are derived from responsibly managed or recycled sources. 
•    Products are produced efficiently, without waste, and can be repurposed. 
•    Customers can easily return pre-loved items so we can extract the precious materials.
•    Products do not harm people or the environment. 
•    Product communications are honest, ethical, and promote responsible use.

​To help us achieve this challenging objective, we launched our Sustainable Materials Pipeline (SMP) in 2021. The SMP enables our Design, Product Development, Product Marketing, and Operations teams to work collaboratively introduce more sustainable materials. Plus, it provides us with the tools to rate the sustainability attributes of materials from the start of the process.

Swarovski Crystals are precious resources that we don’t want to waste. Our reignited crystals initiative allows us to give unused crystals another chance to be adored, instead of being discarded. We hold on to any unsold crystals for as long as possible and are committed to ensuring that they are used for their intended purpose. 

We believe in the positive, transformational power of collaboration, and through our conscious design projects and partnerships we donate reignited crystals to world renowned academic institutions, upcoming designers, and established names to use in their designs. Our aim is to encourage them to use this exquisite material creatively while also raising awareness of the importance of sustainable design and waste as a valuable resource.​

In 2021 we partnered with Viktor&Rolf, who integrated reignited crystals into their FW21 Haute Couture collection, and Kevin Germanier, who created his SS22 collection using reignited crystals and sustainable materials. We also collaborated with Germanier to design a recycled perfume bottle for Guerlain encrusted with reignited crystals.

Stalno vlagamo v sisteme za izboljševanje svoje uporabe vode in zmanjševanje uporabe kemikalij v svojih postopkih rezanja kristalov. V našem glavnem proizvodnem obratu v Wattensu v Avstriji sistem za čiščenje odpadne vode z zaprto zanko očisti in reciklira 98 % vode iz postopka poliranja kristalov ter 88 % vode iz postopka brušenja kristalov.

V svojem proizvodnem obratu, ki se prav tako nahaja v Wattensu, uporabljamo krogotok hladilnega maziva za pomoč pri rezanju kristalov. Krogotok drži 1.200 m3 tekočine in za zagotavljanje svoje optimalne učinkovitosti in stabilnosti zahteva previdno dodajanje potrebnih kemikalij. Od leta 2015 do 2021 smo prepolovili količino uporabljanega maziva. Prav tako nam je uspelo iz procesa popolnoma ali delno odstraniti številne kemikalije, vključno s sredstvom za obarjanje in sredstvom proti penjenju, poleg tega pa smo na novo zasnovali zaviralca korozije, da smo se izognili fosforju. 

Vse te izboljšave so bolj rezultat inovacij kot zmanjšane proizvodnje, prav tako pa so se pri njih izkazale varnostne koristi za naše kolege.

Smo podjetje, zgrajeno na temeljih enakosti in vključevalnosti.