Watches

Please entrust your watch to an authorized Swarovski retailer that offers Swarovski watches, to a watchmaker, or to a jeweler who will replace the battery for you.

Replacement straps are available to purchase and can be ordered from most authorized Swarovski retailers.

The metal components of Swarovski watches are made of stainless steel, that is virtually immune to rust, discoloration, and corrosion.

Nickel is also a component part of this composition.

All materials used for Swarovski watches comply with European regulations on nickel release.

In some very rare cases, allergies to Swarovski watches may occur due to high skin sensitivity to nickel. If this happens to you, we recommend that you cease wearing Swarovski watches.

Swarovski watches are embellished with premium quality Swarovski crystals.

Information on features and instructions on how to change watch settings can be found in the operating instructions manual.

Strap exchange can be done without any tools

1 - Gently pull spring clip and lift the strap out
2 - Place one end of the new strap into the slot
3 - Gently pull spring clip once again and insert the other end into the remaining slot
4 - Release the spring clip until it clicks. Check by carefully pulling the strap to make sure it is attached properly

Link to instructions

1. Remove product from the packaging.

2. To install the Swarovski sparkling case, position it carefully on top of the Apple Watch®.

3. Ensure that the Swarovski case matches the shape of the Apple Watch® in line with the position of the buttons.

4. To remove the Swarovski case, detach it carefully by lifting it up from the Apple Watch®.

5. To clean the Swarovski case, use a clean, dry and antistatic cloth to remove light dust layers. For heavier dirt, use lukewarm water with a little dishwashing detergent.

6. The Swarovski sparkling case is specifically designed for the Apple Watch® in size 40mm and 44mm and is compatible with Apple Watch® Series 4 and 5.

7. Avoid contact with water as the Swarovski sparkling case is a delicate product.

8. Apple Watch® is a trademark of Apple Inc.

9. Swarovski is not liable for defects or malfunction caused by misuse, abuse, failure to follow provided instructions, or use with equipment with which it is not intended to be used.

Opening your Swarovski timepiece is simple. Begin by locating the fold-over clasp and gently lifting the secure lock with your fingertip. On a new watch, the mechanism may feel slightly firm at first, but it will ease with time. Once unlatched, the bracelet effortlessly releases, allowing you to slip into and out of your timelessly elegant Swarovski watch with ease.

啟動您的 Swarovski 時計輕而易舉。輕輕打開您的新錶盒，展現其精美工藝技術。小心移除錶面的所有保護膜。如果要啟動精密機芯，只需移除保護電池的塑膠條。現在請依照下方指示，把手錶設定到正確時間。最後，打開錶扣或解開錶帶，然後把手錶戴上您的手腕，以達到完美貼合。 

每一款 Swarovski 時計，都是以傳統工藝精心打造。如果您希望為手錶增添更多鍊帶，我們建議您把這項調整工作交由 Swarovski 授權零售商店、熟練的鐘錶匠、或專業珠寶商處理，以確保其精準度和美觀不受影響。

Swarovski 手錶設計精湛，結合了傳統與精緻的精準度。如果您的手錶錶帶感覺太鬆需要調整，我們建議您把這項工作交由 Swarovski 授權零售商店、熟練的鐘錶匠、或專業珠寶商處，以保持其優雅和準確性。或者如果您只是想更換錶帶款式，這個過程既快速又簡單，請查閱我們的指南。

設定施華洛世奇手錶的時間非常簡單： 設定您的 Swarovski 手錶時間輕而易舉：

1. 輕輕把錶冠從手錶側面拉出至最外位置（手冊中的位置C）。
2. 轉動錶冠直到時針和分針與您想要的時間對齊。
3. 把錶冠按回原位，即可完成設定。